‘Non-toxic mould killer’ banishes mould from bathroom tiles in 30 mins
Handy tips for cleaning mould in the house
Now spring is here, many Britons are looking for ways to give their homes a seasonal refresh ahead of the warmer months. Spring is a great time for Britons to do the tasks they have been putting off during the winter such as deep cleaning floors, cleaning inside and behind radiators and giving windows a good scrub.
One task that can be ignored during the winter months is mould removal, especially in bathrooms.
While mould is unsightly and can be toxic, some people either don’t realise they have mould on their walls or don’t understand the dangers of it and so fail to remove it before it becomes a bigger problem.
Mould is very common in UK homes and can grow on tiles, fabrics, carpets and wood when there is moisture in the air.
Some of the worst areas for mould are in bathrooms where there is a damp environment and more condensation.
Bathroom walls and tiles should be cleaned down monthly or even weekly, especially after a cold winter where moisture and water vapour will have gathered and could have caused mould to form.
Rikki Fothergill, bathroom style expert at luxury bathroom specialists Big Bathroom Shop has shared two ways to remove mould from bathroom walls and tiles.
The bathroom expert first advised homeowners to check to see if they have any mould in their bathrooms.
He said to look out for damage such as small black mould spots or a muddy film on grout, tiles and walls.
White vinegar can kill paving moss without scrubbing [LATEST]
Mow lawns using ‘one third rule’ to avoid ‘weed infestations’ [INSIGHT]
‘I’m a housekeeper and here are things I would avoid in my kitchen'[ANALYSIS]
Depending on the severity of the mould and where it is, there are “two options” homeowners can consider.
He said: “One way to tackle mould is with chlorine bleach. There are plenty on the market and many of them are designed to specifically kill bathroom mould.
“You will have to be careful with this method particularly if you have coloured tile grout or caulking, as the bleach can make both fade considerably.
“For this method, simply spray the cleaner directly onto the mouldy grout then allow it to sit for 20 to 30 minutes before scrubbing with a stiff-bristled brush and rinsing.
Looking for a new home, or just fancy a look? Add your postcode below or visit InYourArea
“For an alternative, non-toxic mould killer, white vinegar is your best bet.
“Grab yourself a spray bottle and pour in some white vinegar.
“It does not need to be diluted, in fact, it is at its most effective when it is just pure vinegar being sprayed.
“The same cleaning method as above applies but after scrubbing, we advise to spray on another layer for 30 minutes before rinsing.”
Some experts recommend using baking soda, or bicarbonate of soda, mixed with water to remove mould.
Baking soda has a pH of around eight which makes it too alkaline for mould to grow. It’s also mildly abrasive which means it can help remove stubborn mould stains.
The ingredient, which is usually used in baking, doesn’t contain chemicals and can be used around pets.
It’s also a natural deodoriser which means it can help banish unpleasant damp and mouldy smells while cleaning.
Source: Read Full Article